Infared Imaging
Airborne Environmental Consultants. IR –Fusion Technology Infrared and visible light images fused together on one display. Moisture prevention assessment; mold assessment. Carbon Monoxide C0 CO²
- Visual inspection inside the house for moisture intrusion or mold
- Analytical tests in areas where mold samples are taken. Humidity, temperature, and measurements..
- First air sample with outdoors for comparison of air indoors.
- If there are visible areas of suspected mold, we will take 1 tape lift from area.
- Mold assessment report of finding ;a management plan
- Post Remediation Verification:
- Cost: Residential cost below and Commercial
Property add $100.00
Limited: 3 air samples only-----$595.00; additional sample each -$125.00
Infrared: Moisture assessment FREE With mold inspection.
Infrared: Moisture assessment ….Only Build envelope -- $500.00
Greater than 12 Air-O-Cell, Tape, Swab samples will be quoted.
We believe that a limited survey of this nature will allow residential home owner’s , real estate agents, insurance adjustors , property managers, and lenders to identify if mold problem exists and whether a full investigation is warranted.
For comparison, our complete investigation includes.
- Inspection—inside, under pier beam, and HVAC inspection.
- Moisture—testing in plumbing areas.
- Analyticals in all mold sampling areas, May include entire house.
- Mold sample including baseline outdoors, services areas of each HVAC unit in damaged areas, wallchecks in suspect walls, sample of suspect materials and any other samples required.(May take as many as 15- 20 air samples.
- Digital photos of damaged areas.
- CAD drawing of property.
- Analysis of all data gathered.
- Written report which includes a mold assessment report.
- Written a mold management plan for a facility or dwelling.
- Written a mold remediation protocol.
- Certificate of Mold Damage Remediation.
- Licenses and Accreditation's.
- AEC Consultants does not do any mold remediation or is affiliated with any remediation company. It is up to the customer to hire a specific contractor.
- Payment is due when work is performed
- Written Assessment Available in ten days or less
Being able to discover hidden areas of energy loss and moisture conditions can be an important part of a building investigation. Discovering these invisible building defects during your inspection could help prevent structural damage and mold related health concerns.
When you request the option of infrared imaging during your environmental or home inspection you can see active air and water leaks in real time. Infrared scanning can help find water leaks in roofs and walls without the need to remove building materials.
Documenting existing defects with infrared images can also assist with negotiations during real estate transactions or conflicts with builders.
VISUAL INSPECTION EXPLAINED:
An inspection is a visual inspection of the property, inside and out, for evidence of mold and signs of water intrusion. The Visual Inspection reveals obvious molds on surfaces and helps determine hidden mold problems that may go unnoticed to an un-trained eye. A visual inspection can also uncover existing and potential moisture problems in construction materials. Wet or damp wood, drywall, and even concrete may not be a mold problem now, but will be if ignored. Airborne Environmental Consultants uses specialized electronic equipment to detect moisture levels of construction materials such as stucco, wood siding, plaster, drywall, cabinets, shower stalls and floors. |
